With thousands references, Thordon bearings are installed on:
• Rudder System (Thordon SXL, ThorPlas)• Water-lubricated Prop. shaft system (COMPAC)• Deck equipment (ThorPlas). Do you want to 100% avoid the oil/grease lubrication for your bearings, Thordon bearings are the solution!
Keep the Oceans Clean!
Thordon propeller shaft bearings are available in four different grades and multiple configurations to offer the optimal bearing solution for each owner’s specific application and technical requirements. Open seawater lubricated bearing options include Thordon COMPAC, RiverTough, SXL, and XL.
With over 35 years of experience, Thordon has solid references in over 2,000 marine propeller shaft bearing applications. Whether your bearing needs are for repair, conversion, or newbuild, Thordon propeller shaft bearings and bearing systems deliver proven, reliable, cost-effective performance.
Thordon COMPAC is a high performance water lubricated bearing system primarily for “blue water” operating conditions. Specially formulated with a low coefficient of friction to reduce startup friction and eliminate stick-slip, COMPAC is designed to promote early formation of a hydrodynamic film at lower shaft speeds. The lower (loaded) portion of the bearing is smooth, while the upper half has water grooves to lubricate and cool the bearing.
Thordon RiverTough bearings are specially formulated to provide longer wear life in highly abrasive and dirty water conditions, such as river boat propeller shafts and suction cutter head bearings on dredges. RiverTough has proven to last at least twice as long as rubber bearings in extreme environments.
Thordon SXL offers a lower coefficient of friction for lower break-away torque and smoother operation at lower shaft speed, increased resistance to third particle abrasive wear, and longer wear life compared to XL.
Our traditional propeller shaft bearing grade, Thordon XL is a general purpose bearing offering superior performance compared to many other bearings commonly used in propeller shaft applications. XL provides long wear life, a low coefficient of friction, reasonable abrasion resistance, and cost effectiveness.
The Thordon TG100 is a mechanical seal for 88mm (3.5”) to 305mm (12”) propeller shafts found in workboats, dredgers, tugs, yachts, patrol craft, and other coastal vessels operating in either clean or dirty, abrasive-laden water.
Manufactured for long wear life and reduced maintenance costs, TG100’s elastomeric bellows accept both axial and radial shaft movement and compensate for alignment issues. Its unique emergency seal allows stand-alone operation to get you back to port safely, without damaging the seal. The wedge “lock” design ensure the rotary face is perfectly square to the shaft.
The Thordon SeaThigor seal is a mechanical face seal for 300mm (11.8”) to 650mm (25.6”) water lubricated propeller shafts found in yachts, cruise ships, merchant ships and naval vessels.
Manufactured for long wear life and reduced maintenance costs, no visible leakage or SiC faces. Thordon elastomers ensure no need for replacement parts, Safe Return To Port Emergency Seal, Outside pressurized design to counter leakage direction and Metal compression springs used to maintain constant face closing forces.
SeaThigor mechanical face seals are manufactured to last and are designed for use in newbuild construction and retrofits.
Thordon SXL rudder bearings offer low friction, operating pressures up to 12 MPa (1,740 psi) and do not require grease or greasing systems removing any risk of pollution. Thordon SXL can also withstand high shock loads and edge loading.
An impressive reference list of demanding, yet satisfied customers is available. Thordon SXL is recognized as the proven choice for value, guaranteed performance, and freedom from pollution concerns.
Thordon guarantees that SXL rudder bearings will meet Classification Society wear specifications for 15 years in all newbuild projects, or twice the life of the replaced non-Thordon bearing to a maximum of 10 years for repairs, or a new bearing will be supplied, free of charge.
In addition to SXL rudder pintle, stock, and carrier disc bearings, SXL TRAXL or ThorPlas-Blue can be specified grease free in steering and linkage applications, as well as fin stabilizers. In workboat applications, ThorPlas-Blue is recommended for the more highly loaded bushings in the tiller arm and "jockey-bar" linkages. Both products operate grease free saving you time, money and the risk of pollution.
ThorPlas-Blue is an engineered thermoplastic, for high pressure applications up to 45 MPa (6,527 psi). It is capable of wet or dry operation and displays very low wear in non-abrasive environments. This lifetime lubricated homogenous polymer never requires grease or oil lubrication.
Ensuring reliable operation of all equipment installed above the waterline is a tough issue for any ship’s crew. Deck machinery and steering gear bearings require frequent maintenance and grease lubrication. If routine maintenance is delayed or greasing is overlooked, it has a high cost consequence for the ship owner—seized bearings can cause expensive rope replacement, safety issues as a result of manual greasing, and vibration causing damage to the piston and cylinders.
ThorPlas-Blue is a maintenance-free solution, eliminating a source of pollution. The proprietary engineered thermoplastic bearing is capable of pressures up to 45MPa (6,527 psi); higher pressures may be possible with Thordon Engineering review. ThorPlas-Blue can easily be back fit into virtually all applications where greased bronze is currently installed. A stainless steel or non-corrosive mating surface should be used.
· Fairleads
· Lifeboat davits and sheave bearings.
· Tiller arm and jockey bar bearings
· Hydraulic steering gear self-aligning bearings
· Pivot point bushings on embarkation and loading platforms
· Cranes, hoists, and deck loading equipment
· Winches
· Watertight doors and hatches
DUWEL Group provides high quality environmental products only from suppliers that we believe in and we strive to ensure our partners are getting the best solution.
DUWEL’s business is based on building long-term relationships with our customers to become their partner, rather than “just” being a supplier.
We always try to ensure that our partners get honest and knowledgeable advice for their needs. If our products aren’t right for the application we will say - our reputation and relationships are more important to us than individual sales.
Partnering with DUWEL not only ensures excellent technical and environmental solutions but you can also expect a little more, something extraordinary that will exceed your expectations.
We call it "DUWEL CLASS"
DUWEL Group Åsvägen 34 891 30 ÖRNSKÖLDSVIK SWEDEN
Org.nr. 556966-2314
Office Sweden: +46 660 790 60 Office Norway: +47 55 70 50 65 Office Finland: +358 9 615 000 70
Keep updated on DUWEL activities in social media.